How to Remove Hose Clamps

Are you wondering how you can remove hose clamps without any hassle?

This article will guide you through a step-by-step process and clear all your confusion.

You must have seen the variety of hose clamps available in the market. These hose clamps’ primary purpose is to prevent the fluid from leaking out at the connection points.

You can find these clamps in various applications such as small engines, plumbing, axle drive shafts, and a gas-powered sprayer.

How to Remove Hose Clamps – 3 Different Methods

We have provided the top 3 methods of removing hose clamps. We recommend you pick the one that works for you. That depends on the tools you have and the urgency of the project.

1.   Standard Screwdriver Method

The first method is using a standard screwdriver. 

It does the job, but you should be extremely careful with this method. Make sure to only use it on connections that won’t break, such as a steel hose barb.

If you try to use it on a plastic-type fitting, there’s a good chance you’ll end up breaking it. It was preferable to find the appropriate size screwdriver, force it into the crimp tear, and slowly pry it open.

To be honest, we aren’t fans of using a standard screwdriver as a pry tool. Take extra measures when you use it and hold it with care. Having the screwdriver slip is a common risk and can harm you and the surrounding components.

2.    Rotary Tool Method

For this method, you should have a small cutting disc to cut the clamp. Doing so creates heat and sparks, so be careful while carrying this out. We would not recommend using this method on a fuel line or fuel venting connection.

After the disc, cut the clamp off the ear portion so the material can be directed downward. The material should not be directly embedded into the plastic once the clamp is off.

You can then spread the clamp and push off the connection to remove the hose.

3.    Hose Pliers Method – Recommended

For this method, you require pliers designed for removing and installing hose clamps. These pliers have jaws specifically designed to cut the clamp without damage.

Alternatively, you could use a bowl or nose cutter to cut the clamps, but they often don’t have the required frame or force for cutting.

After that, you can spread the clamp and remove the hose from the connection.

Although this method requires an additional tool, it is the most recommended because of its safety.

Top 3 Hose Clamp Pliers

If you choose to use the third method to remove hose clamps, you’ll surely need a reliable set of pliers. In this section, we’ve shared the top 3 hose clamp pliers that users most recommend.

Let’s get to it without further delay:

Orion Motor Tech 9-Piece Hose Clamp Plier Set

The Orien plier set is most recommended for beginners. That is because it includes an instructional manual for each type of plier.

BETOOLL 9-Piece Hose Clamp Pliers Set

BETOOLL pliers set comes with six pairs of regular pliers, including cross-slotted jaw and swivel jaw fittings.

It is designed in such a manner that you can easily re-use the clamps. Besides, it also provides maximum support for reaching tight spaces.

Drake Off Road Hose Clamp Pliers Set

The Drake off-road pliers set provides two sets of pliers. One with the jaws and the other with the cross-slotted jaws.

In both sets of pliers, the jaws rotate to suit any angle. Moreover, they are suitable for most ring-type and flat-band clamps. 

The Bottom Line

We hope that reading this article helped you figure out how you can remove hose clamps. You can choose the method you find suitable with the tools you have available to you.

Leave a Comment

Share via
Copy link
Powered by Social Snap