{"id":5888,"date":"2021-10-05T19:06:31","date_gmt":"2021-10-05T19:06:31","guid":{"rendered":"https:\/\/woodsybond.com\/?p=5888"},"modified":"2022-07-25T14:43:53","modified_gmt":"2022-07-25T14:43:53","slug":"how-to-install-a-generac-whole-house-generator-in-6-simple-steps","status":"publish","type":"post","link":"https:\/\/woodsybond.com\/how-to-install-a-generac-whole-house-generator-in-6-simple-steps\/","title":{"rendered":"How to Install a Generac Whole House Generator in 6 Simple Steps"},"content":{"rendered":"

What do you do when the power goes off in the middle of your daily routine? Can you imagine how life would be without power for days! Sudden power outages cause a communication failure. Food in your refrigerator may spoil. Water supply stops, and in the end, it can put electrical appliances at risk. There are reasons power goes off when you least expect it; an inside or outside cause may influence it. But whichever the influence, power outages cause disruptions. With a powerful backup supply, you’re able to maintain your normal daily life at home. Generac whole house power generator solves your problems. If you’re always looking for comfort, then this article is for you. Learn how to install Generac’s whole house power generator in six simple steps.<\/span><\/p>\n

\"\"<\/p>\n

\n

1. Choose a Suitable Location<\/b><\/h2>\n

Your safety and those of your family members must always be a priority. You should always follow the manufacturer’s installation guidelines. This helps you to achieve the most efficient and avoid causing danger. Generac guidelines in the manual help you choose a suitable location. That should be outdoors, in a stable and well-drained area free from flooding.<\/span><\/p>\n

The outdoor location should be approximate;1.5 feet from the house. Five feet from the windows, doors, and ventilation points; 3 feet in front of the generator for easy access. Generators emit carbon monoxide gas, which is dangerous for human beings when inhaled. So, Generac house generators should be outdoors, where there is free circulation of air. Besides, your suitable location should be close to your electric panel and the fuel or gas meter. This helps to reduce the cost and time of installation.<\/span><\/p>\n

\n

2. Prepare the Site With a Concrete Pad or Genpad<\/b><\/h2>\n

Your generator needs to sit on the concrete slab or on a 3 inch fabricated Genpad. Genpad comes when you buy your generator. Prepare the site by removing the grass and the dirt to make a rectangular shape of 6 inches.<\/span><\/p>\n

Mix the concrete with the sand and pour them into the rectangular barrel. Compact to make the concrete pad ready. Or you can use the new Generic Genpad, which does not need you to prepare a concrete slab on the ground. You place the fabricated Genpad on the site where you want your generator to sit.<\/span><\/p>\n

Things to Avoid When Preparing the Site<\/b><\/h3>\n